Russell Sanchez firing 2014Russell Sanchez firing 2014 Making Pueblo Pottery

 1.     Materials

Red ClayRed clay Temper3+ Temper  Raw Clay=Clay to make pottery

Pottery is made from native red clay.  For traditional pottery the clay is dug from the ground and the processed by the artist.  Temper is added to give it strength.  Once the clay is mixed it is ready to make a piece of pottery.

2.     Building Techniques

LuAnn coiling pottery2qLuAnn Tafoya – coiling a bowl  

Nathan Youngblood Coiling 2014Nathan Youngblood coil building a storage jarNathan Youngblood Coiling 2014d Nathan Youngblood smoothing the outside and inside of a large jar.

Maria Martinez Making PotteryMaria Martinez – coiling and smoothing a bowl

All Pueblo pottery and most Tribal pottery is COIL built, not thrown on a wheel!  The clay is rolled out into coils and built one coil on top of another until the vessel is finished.  The larger the vessel, the more time it takes to build.

Virgil Ortiz Pottery materials1a

Once the jar is finished being built, it is sanded to make the surface smooth.  It is then ready to be carved or painted.

3.     Painting Or Carving to Create Surface Designs

Pottery is painted or carved BEFORE firing.

3a.      Slips

Materials for pottery making

White Clay SLip1White Slip   Clay Slip for polishing1bRed Slip Raw Form      Red Slip1.bRed Slip Crushed & Water Added

 

wild spinach plantKwaa Povi or Wild Spinach or Rocky Mountain Bee Weed. The leaves from this plant are picked when the flower starts to bloom.  They are gathered and boiled to create the black paint used on the pottery.

Wild Spinach 1Wild Spinach Plant after it is boiled and left to harden.  It is ground up and mixed with water to paint on the pottery.

Wild Spinach Liquid  Wild Spinach Plant after it is liquified.

Bee weed and metate Hopi Rocky Mountain Beeweed plant and a metate for grinding the solidified essence into a watery paint.

bee weed and slip for potteryClay slips in raw from before they are ground up and painted on the pottery.

Before a piece can be painted, a slip, or wet coat of clay, is applied to the surface.  Often several coats are applied.  This creates a less porous surface to allow the paint to adhere during the firing. They also provide color for contrast with the painted designs. Slips are usually either a white clay (seen above before being crushed and turned into a slip) or a red cay (seen above both in its raw form and mixed with water).  The white slip is typically applied with a rag while the red slip is stone polished onto the surface.

A piece can also be slipped with water, which is called a “wet polish” and again it provides a hardened surface for designing.

3b.      Painting

Virgil Ortiz Painting1jVirgil Ortiz painting with wild spinah plant on a canteen.

yucca brushesYucca Brushes used to paint pottery

Designs are painted onto the surface with clay slips (red, other colors), or Wild Spinach Plant or Rocky Mountain Bee Weed (black color).

The wild spinach/bee weed is crushed and then mixed with water to paint onto the surface. The potter uses either a paint brush with very few hairs or a brush made from yucca which has a single fiber to create fine lines.  After it is fired the wild spinach/bee weed will turn black.

3c.      Carving

Carved Bowl1Carved and sanded and ready to polish.  Carved polished bowlAfter polishing!

For carved pottery, it is carved BEFORE firing.  Potters may carve when the piece is either fully dry and hard or when it is leather hard (i.e. still a bit wet).  The designs are often cut using tools such as screw drivers, nails or other sharpened instruments.

3d.      Polishing

2014-05-08 09.34.39Daryl Whitegeese Polishing tan1.b

Daryl Whitegeese Polishing the surface of a jar.

Polishing stonesThese are stones used for polishing the surface of the pottery.

After a piece is carved it is stone polished or burnished.  Above left are actual stone used for polishing pottery.  Each time a layer of slip is applied the entire area has to be polished again.  The potter may polish a piece three to five times. The longer and better an artist is able polish, the shiner the vessel will appear. Here you can see Daryl Whitegeese polishing the neck of a piece and note the stone in his fingers which he will use to polish!

3e.      Etching or “Sgraffito”

Jennifer Moquino etching pottery1aJennifer Moquino etching pottery1Jennifer Moquino etching pottery1b

After a piece is fully polished the artist may etch designs into the surface of the clay.  This can actually be done either before or after firing.  It is the ONLY technique that can be done after firing.   A sharp tool such as an x-acto knife, nail or pen knife is used to cut away the polished surface.  This is most often seen on smaller pieces, as it is very time consuming.  Above shows the process of etching into the surface and then how a piece by Jennifer Moquino appears as it is being designed and then after it is finished.

3f.      Painting Clay Slips into Etched Areas

Jennifer Moquino Painting pottery process Jennifer Moquino painting clay slips 2014

The above photos show the process of how Jennifer Moquino paints the clay slips into the etched areas of her pottery to give them additional coloration.  It takes time to find the various natural clay colors which will achieve the colors she wants to use on her pottery.

______________________________________________________

Firing

Each Pueblo/Tribe and each artist has their own distinctive way of firing their pottery.  However, they all have something in common which is each piece of pottery is fired outside!  Wood and manure is used to heat the fire and it is a risky part of the process as everything is finished on a piece (i.e. it is carved, polished or painted) when it is put into the fire.  It is only after the firing is complete that the potter will know if it has been successful and the piece has survived or if it has cracked or broken in the process.  If it is damaged, weeks of work are lost and the potter breaks the piece to make sure that it never reaches the market.

1.     Maria Martinez (1887-1980), San Ildefonso Pueblo, Firing Pottery

Maria Martinez FiringThis is a classic photo of Maria firing her pottery.  She would use the sticks to pull the pottery out of the fire!

____________________

2.     Russell Sanchez, Pottery Firing

Russell Sanchez Firing CompositeRussell Sanchez firing 2014

Here are two composite images which show how the pottery starts out red.  At the end of the firing the pottery is still red but horse manure is put on top of the fire and it is a reduction process which turns it black.  Notice at in the bottom images that the red pieces in the top left are now black!   The pieces can then be “two toned” to make them black and sienna.  This is done after the firing.  The additional stone and inlay are the last step after the firing.

 

2.     “Black & Sienna” Two-toning pottery

Jennifer Moquino Two toning process

 

 

Jennifer & Mike Moquino “two-tone” their pottery to make sections “black and sienna”.  The process is to initially fire the piece black, then an area is heated with a blow torch to burn off the black. The result is an area which is now sienna in coloration.

Click here to watch Mike and Jennifer Moquino two toning pottery!

 

__________________

3.     Helen “Featherwoman” Naha (1922-1993), Hopi-Tewa, Firing Pottery

Helen Naha Firing1a Helen Naha Firing1b

 

Here are several photos of Helen Naha firing her pottery.  It is placed on pottery shards and she is firing several pieces at the same time.  They are surrounded by sheep manure which is stacked in a “honeycomb” style and then lit on fire.  When the manure burns out the firing is over.

 

 

 

_______________________________

4.    Nathan Youngblood, Santa Clara, Firing Pottery

Firing1Firing1aFiring3Firing4

Firing7Firing8Firing10

Nathan Youngblood is considers firing the pottery as critical as any other step in the process.  Above it is possible to see how a jar starts out red and placed in a metal crate. The wood around the piece creates the firing.  After the firing is complete the jar could be taken out and it would be red.  Otherwise, Nathan smothers the fire with manure and this reduction process turns the piece black.

Please contact us with any other questions at (480) 440-3912 or [email protected]